A new concept for DIY gardening, we are proud to present our new DIY Raised Steel Garden Beds. This concept allows you to take these garden kits home in the trunk of your car and easily put them together yourself. We designed them to be very versatile, durable, as well as cost effective. We offer panels in 2 or 3 foot sections and that allows you to put them together in any configuration that your imagination comes up with. The width of a bed is either 2 or 3 feet. By combining the 2 and 3 foot sections, you can achieve any length you like.

An “L” shape for the corner of your yard. A “C” shape for easy access from the middle… the combinations are endless!

You get to create whatever you like and the best part is they are easy to put together. Below we have put together a instructional video that will help you through the assembly process. If you have any further questions at all, please don’t hesitate to contact us.

Warning: Wear gloves. Sheet metal can be very sharp. Cuts can happen.

Prepare the area where you want your gardens. It should be as flat and level as possible.

Build your garden as close as you can to their final resting place. They are hard to move once they are put together.

Review the video below before you start.

VIDEO NOTE: The video says use 3 screws per joint. We provide 4. Use 4 screws per joint. When fastening corners, for out side corners, screw from the outside to catch the back side of the roofing panel inside the trim. On inside corners, screw from the inside.